Recently Updated Pages

Cartographer is Eddy current bed probe, which makes bed meshing a lot faster and a lot more perci...

Disclamer All actions are at your own risk. Modifying the printer in this way will invalidate th...

3D printer has several moving parts. Main things are toolhead and bed. Toolhead moves in X and Y ...

You have a Vanilla Klipper installed on your machine!? To enable WiFi on the Qidi machine a ke...

You want to use the fantastic Shaketune Repo for your Qidi? Note: latest version of Klippain r...

Official nozzles Qidi has their own nozzle standard (19mm length) which is shared across all 3 p...

Nozzle crashing into bed Qidi printers have sensorless homing. Stepper motors can detect when th...

In case you need the mount for Rev H check this one out.   https://www.printables.com/model/727...

Everyone who has done signup has full edit rights. Can create new tutorials, guides, how-to's or ...

By Einlander The Qidi 3 series toolhead is based on the Makerbase THR36 and THR42 toolheads (http...

Adjusting bed leveling screws It's useful to adjust screws, if bed is tilted or some corners of ...

There's cool tool that helps with tensioning: https://github.com/Frix-x/klippain-shaketune > McS...

X-Smart 3, or any other model with carbon-fiber rods In case of toolhead movements on carbon fib...

Sadly, all kinds of toolhead crashes are quite common Bed is rising up, doesn't stop and crashes...

In short, Synthetic Greases with PTFE, especially good ones are Super Lube 21014, SL21030 and 411...

QIDI Print 6.5.3: https://drive.google.com/drive/u/0/folders/1Yr7Kv44XtYu31TZm2HehNrdMRkszEsRw  

Qidi own profiles are eagerly fast. For example their profile for Qidi own gray Rapido PLA max vo...